Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 16 Friday, October 27, 2023 1:06 PM
16 INSTALLATION
WARNING
• If connecting to a 4-wire power supply cable
electrical system, the appliance frame connected
ground wire MUST NOT be connected to the
neutral wire of the 4-wire electrical system.
4-Wire Grounded Junction Box
a
Cable from Power Supply
b
Cable from Cooktop
c
Ground Wire
d
Red Wires
e
Green Wire (Ground)
f
UL-listed Conduit Connector
g
Black Wires
h
Junction Box
i
White Wire (No Connection)
Installing the Cooktop Unit
1
Visually inspect the cooktop for damage.
Make sure all cooktop screws are tight (see
below for locations).
a
3 Screws (Same Both Side)
30" Cooktop: 3 Screws (Same Both Side)
b
36" Cooktop: 4 Screws (Same Both Side)
2
Check and prepare the installation location.
• See Dimensions and Clearances.
3
Carefully lower the cooktop into the
countertop cutout, making sure not to trap
any wires.
NOTE
• Do not use caulking compound. The cooktop
must be removable, should service be required.
4
Attach the retainer brackets
of the cooktop; then snug the bolts against
the bottom of the countertop as shown.
NOTE
• The retainer brackets MUST be installed to meet
local codes or, in their absence, with the National
Electrical Code ANSI/NFPA No. 70, latest edition.
a
Cooktop
b
Countertop
a
to the bottom
Publicidad
