Publicidad
Idiomas disponibles
Idiomas disponibles
1. APPLICATIONS
2. SAFETY WARNINGS
2.1 SYMBOLS
2.2 GENERAL SAFETY WARNINGS FOR TOOLS
2.3 SPECIFIC SAFETY WARNINGS
2.4 WORK AREA
3. GROUND CONNECTION INSTRUCTIONS
4. MACHINE/COMPONENT CHARACTERISTICS
4.1 TECHNICAL SPECIFICATIONS
4.2 MACHINE COMPONENTS
4.3 PACKAGE CONTENTS
5. ASSEMBLY INSTRUCTIONS
5.1 INSTALLATION OF THE DIAMOND BLADE
5.2 INSTALLATION OF THE SLPASH GUARD
5.3 INSTALLATION OF THE FENCE
5.4 INSTALLATION OF THE ANGLE GUIDE
5.5 FILLING THE WATER TANK/CHANGING THE WATER
6. OPERATING INSTRUCTIONS
6.1 FOR SWITCHING THE SAW ON AND OFF
6.2 USE OF THE FENCE AND ANGLE GUIDE
6.3 HOW TO CUT
7. MAINTENANCE OF THE SAW
7.1 CLEANING THE SAW
7.2 AFTER-SALES SERVICE
8. GUARANTEE
9. CERTIFICATE
CAREFULLY READ THIS OPERATOR'S MANUAL BEFORE
USING THE MACHINE.
KEEP THIS MANUAL FOR FUTURE REFERENCE
1. - APPLICATIONS
The ND 7in READY tile saw is a lightweight and functional
cutter, suitable for cutting ceramic materials. Its particular
working system with wet blade allows the complete
removal of the dust produced by the cut.
The machine can make straight cuts, angle cuts, miters
and special cuts such as square cuts for electrical boxes
with ease; with the advantages of size, weight and
manageability of the machine that place it in the portable
segment.
ATTENTION! Read all of the safety warnings and all of
the instructions. Failure to observe all of the warnings and
instructions indicated below could result in electric shock,
fire and/or serious injury.
Save all the warnings and instructions for future
reference.
· TRANSLATION OF THE ORIGINAL · ENGLISH
English
English
2.- SAFETY WARNINGS
2.1 Symbols
2.2 General safety warnings for tools
1.
KEEP GUARDS IN PLACE and in working order.
2.
REMOVE ADJUSTING KEYS AND WRENCHES. Form
habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it
on.
3.
KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
4.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't
use power tools in damp or wet locations, or expose
them to rain. Keep work area well lighted.
5.
KEEP CHILDREN AWAY. All visitors should be kept
safe distance from work area.
6.
MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
7.
DON'T FORCE TOOL. It will do the job better and
safer at the rate for which it was designed.
8.
USE RIGHT TOOL. Don't force tool or attachment to
do a job for which it was not designed.
9.
USE PROPER EXTENSION CORD. Make sure your
extension cord is in good condition.
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
Table A shows the correct size to use depending
on cord length and nameplate ampere rating. If in
doubt, use the next heavier gage. The smaller the
Read the operator's manual
Do not expose to rain or moisture
Wear safety glasses
Wear glasses and hearing protection
Wear protective gloves
Wear a protective mask
Do not touch the blade
Precaution
EN
- 3 -
Publicidad
