Descargar Imprimir esta página

Berner BHAB 2300E-1 Traduccion De Las Instrucciones página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
110079923 BDAL Berner BHAB 2300E-1 DL2.qxp_110079923 BDAL Berner BHAB 2300E-1 DL2 06.11.23 15:30 Seite 9
GB
Translation of the original
operating instructions
Please familiarise yourself with these operating instructions
before using this product because prolonged reliable and
trouble-free operation will only be ensured if it is handled
properly.
We hope your new hot air tool will give you lasting
satisfaction.
Safety warnings
Read and observe this informa-
tion before using the tool. Failure
to observe the operating instruc-
tions may result in the tool
becoming a source of danger.
When using electric power tools,
observe the following basic safety
precautions to avoid electric shock
as well as the risk of injury and fire.
Used carelessly, the tool can start
an unintentional fire or injure persons.
Check the tool for any damage
(mains connection lead, housing etc.)
before putting it into operation and
do not use the tool if it is damaged.
Do not leave the tool switched on
unattended.
Children should be supervised to
make sure they do not play with
the device.
First time of use.
A small quantity of smoke may
occur when the tool is used for the
first time. This smoke is caused by
binding agents released from the
heater's insulating film during the
first time of use.
About this document
Please read carefully and keep in a safe place.
- Under copyright. Reproduction either in whole or in part
only with our consent.
- Subject to change in the interest of technical progress.
To let the smoke escape quickly,
the tool should be set down on its
standing surface. The area you are
working in should be well ventilated
when using the tool for the first time.
Any smoke coming out of the tool is
not harmful!
Take the ambient conditions
into account.
Do not expose electric power tools
to rain. Do not use electric power
tools when they are damp or in a
damp or wet environment. Exercise
care when using the tool in the
proximity of flammable materials.
Do not direct the tool at one and
the same place for a prolonged
period. Do not use in the presence
of an explosive atmosphere.
Escaping heat may be conducted to
flammable materials that are hidden
from direct sight.
Protect yourself from
electric shock.
Avoid coming in contact with
grounded objects, such as pipes,
radiators, cookers or refrigerators.
- 9 -

Publicidad

loading

Este manual también es adecuado para:

412195