Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
3. Installing the backsplash
To mount the backslash (C) to the wall, apply a thin
bead of silicone compound (not included) to the
unpolished back side and bottom of the backsplash
(C). Position backsplash (C) as shown onto vanity
top (B) and against the wall. Clean any excess
silicone compound before allowing it to dry.
4. Replacing the optional knobs
Open the doors (or drawers), remove the
preassembled screws, change the optional knobs and
relock the screws.
3
C
4
6
CARE AND MAINTENANCE
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
B
• Make sure to dry the wood immediately with a soft cloth or towel.
• The engineered stone surface is very sensitive to acid-alkaline liquids and materials,
such as
toothpaste, hand soap, cologne, perfume, nail polish remover, hair color and perm products,
shampoo, drain and toilet bowl cleaner, alcohol, lemon juice, medications, etc. Please try to avoid
contact of these acid-alkaline liquids and materials with the vanity top surface when possible. If
these liquids or materials spill onto the surface, wipe it off immediately. Always clean the surface
and keep it dry after use.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess
colorant promptly with a soft cloth.
TROUBLESHOOTING
PROBLEM
ACTION
1. Vanity doors rub against
another surface.
2. There is an uneven gap
between the doors and cabinet.
POSSIBLE CAUSE
CORRECTIVE
Adjust the leg levelers to ensure
The floor is not level.
the vanity combo is level or adjust
the door hinges.
Adjust the leg levelers to ensure
The floor is not level.
the vanity combo is level or adjust
the door hinges.
7
Publicidad
