8. Place the inner lid back onto the unit.
9. Replace the decorative outer cover.
10. Plug the power adapter into a power outlet.
11. Press the On/O button to switch the unit on.
12. The unit should produce mist, and the LED light should be on.
Functionality
Di user On/O button
Light On/O button
On/O Button
•
Press the On/O button 1 time to turn the unit on in continuous misting
mode. The ON indicator light will be on, the warm white light will be on,
and the di user will continue misting until the reservoir is empty.
• Press 2 times to shut down the unit.
If you set the di user to run until the reservoir is empty, it will run for an
average of 3.5 hours.
Light On/O button
While the unit is running in default mode (the warm white light is fully on),
follow these steps to change the light setting:
• Press the light button 1 time for semi-bright mode.
• Press 2 times for candlelight mode.
• Press 3 times to turn o the light.
While the unit is o , you can also turn the lights on separately.
6
Indicator lights
Mist button
Press the light button 1 time for full light mode.
•
•
Press 2 times for semi-bright mode.
•
Press 3 times for candlelight mode.
Press 4 times to turn o the lights.
•
Mist
Press the mist button 1 time for continuous 1-hour operation. In this
•
mode, the ON indicator light will be o and the 1H indicator light will be
on. The di user will automatically shut down after 1 hour or when the
reservoir is empty.*
•
Press 2 times for the 1-minute on/1-minute o intermittent mode. In
this mode, the 1H indicator light will be o and the 1M indicator light
will be on. The di user will automatically shut down once the reservoir
is empty.
•
Press 3 times for continuous misting mode. In this mode, the ON
indicator light will be on and the unit will automatically shut down once
the reservoir is empty.
*Run time may vary based on essential oil type and number of drops used.
Safety and care instructions
Please read and follow these safety guidelines closely to ensure safe
operation of the di user.
•
Unplug the di user immediately and discontinue use in the event of
smoke or a burning smell.
• Use room-temperature tap, spring, or distilled water.
Never wrap the adapter with cloth, paper, etc. Such actions may result
•
in damage to the di user or fire.
• Never touch the adapter with wet hands; electric shock or injury
may occur.
• Do not disassemble or attempt to repair the di user; this will void
the warranty.
7