Publicidad
Idiomas disponibles
Idiomas disponibles
7. Remove the freezer door by lifting it up.
Re-assembling the freezer Door
To reattach the doors after you moved
the appliance to its final location,
assemble the parts in reverse order.
Installing the water lines
In order for the ice maker to operate
properly, a water line is required. You
may need to purchase a water
purifying system to do that. The water
connection must be made by a
qualified plumber. If the refrigerator is
installed in an area with low water
pressure (below 30psi/207KPa), you can
install a booster pump to compensate
for the low pressure.
the maximum inlet water pressure is
-
700kPa;
the minimum inlet water pressure is
-
207kPa.
The water connection must be
made by a qualified plumber.
Operation outside the water
pressure range may cause
malfunction, severe and
damaging water leaks.
Under normal conditions, a200cc
(5.75 oz.) cup can be filled in
about 10 seconds.
If the refrigerator is installed in an
area with low water pressure
(below30 psi), you can install a
booster pump to compensate
for the low pressure.
What you need to have before you
start
1. Power drill and 1/4" drill bit.
2. 1/2" or adjustable wrench.
3.Flatblade and Philips-head
screwdrivers.
Saddle-type shut off valve (1/4" outlet)
one 1/4"
compression nut
Warning
1 ferrule
(sleeve)
11
Publicidad
