Publicidad
Idiomas disponibles
Idiomas disponibles
2. With the door closed, unscrew 1 and remove
upper hinge cover-right 2 from the right-top
corner of cabinet. Remove the reed switch 4
and the humidity sensor unit 5 from the cabinet
and upper hinge cover-right 2, Install them on
the upper hinge cover-left (provided in the
plastic accessory bag). Unscrew the three
screws 3 which are used for fixing the upper
hinge-right (see the picture below).
3. Remove the upper hinge-right (please hold
upper door by hand when installing.
1
2
3
4
5
4. Remove the upper door from the middle
hinge by carefully lifting the door straight up.
Then place the upper door on a smooth surface
with its panel upwards.
5. Unscrew the two screws 6, then take out the
right door stopper for fridge door 7 and the
right stopper block for fridge door 8, Install the
replacement left door stopper 9 and left
stopper block 10 (provided in the plastic
accessory bag) to the left side with screws 6.
Keep 7 and 8 with the appliance for future
reference.
9
10
6
6. Open the freezer door, use the Allen wrench
(provided in the plastic accessory bag) to
unscrew the screws (11) and the 2 screws (13)
used to fix the middle hinge-right (12) and
remove middle hinge -right (12). Keep the
middle hinge -right (12) for future reference.
7
8
6
8
Publicidad
