BenQ ScreenBar Pro Guia Del Usuario página 3

Installation
1. Extend the clip of the lamp as shown in [Figure
2. Rest the lamp on the monitor bezel [Figure
you fit the clip closely against the monitor bezel so there is no visible gap in
between.
• The applicable range of the monitor bezel thickness is 0.43cm - 6.5cm.
• Refer to the illustrations below for how to install the lamp on different types of
monitors:
Monitor with beveled
3. Connect the USB-C power cord to the AC power adapter [Figure
then plug the AC power adapter into an AC power outlet [Figure
lamp will turn ON automatically.
Using the Lamp
Controls on the Lamp Head
You can use the touch keys and knob on the lamp head to perform various
operations. Refer to the figure below for the names and position of these
controls:
Presence Detection key
When the lamp is off and the ambient brightness is extremely low, all the indicator
lights will go out so as not to disturb the user's sleep at night.
2 English
Monitor with round
bezel
Color Temperature Adjustment key
Brightness Adjustment key
Curved monitor
bezel
Color Temp./Brightness Indicator
Increase key
Decrease key
A
].
B 1
]. It is recommended that
Monitor with bulge
on the back
My Favorite Mode key
Auto-dimming Mode key
0.43cm ~ 6.5cm
B 2 ], and
B 3 ]. The
Power key