BenQ ScreenBar Pro Guia Del Usuario página 5

Turning On/Off the Presence Detection Function
• When the Presence Detection function is on, if the user leaves the detection area for
more than 5 minutes, the lights will automatically turn off to save power.
• With the Presence Detection function on, if you manually turn off the lamp, the
Presence Detection function will be disabled temporarily and the Presence Detection
indicator will flash for about 30 seconds. When the indicator stops flashing, the
Presence Detection function will resume and the lamp will turn on if you are still in the
detection area.
• Do not block the ultrasound sensor on the lamp. Otherwise
the Presence Detection function will not work properly.
• Do not insert any object into the ultrasound sensor to avoid
malfunction of it.
My Favorite Mode
Maintenance and Troubleshooting
• First turn off the lamp and unplug the lamp from the AC power adapter or
USB port. When cleaning the lamp, wipe off any smears or dusts using a soft,
lint-free cloth lightly moistened with a mild detergent solvent. Do not use
alcohol or any other chemical solvents like kerosene, naphtha and so on, as
the lamp's casing may become damaged.
• Do not rinse the lamp or any of its components directly with water.
• If the lamp does not turn on, check to make sure that there are no loose
connections between the USB power cord, power adapter, and USB-C port.
• If the problem persists, please contact the place of purchase for help.
4 English
The Presence Detection function
allows the lamp to turn on
automatically when the user
enters the detection area (as
shown in the figure).
• To turn on the Presence
Detection function, tap the
Presence Detection
The Presence Detection
• To turn the function off, tap the Presence Detection
key again. The indicator will go out.
After you manually adjust the lamp's brightness and
color temperature settings, you can use this function to
save them as your favorite mode.
1. Adjust the lamp's brightness and color temperature
settings according to your preference.
2. When done, tap and hold the My Favorite Mode
key for approximately 3 seconds. The Brightness
Adjustment , Color Temperature Adjustment
and My Favorite Mode
simultaneously to indicate that the settings are
saved successfully.
To access My Favorite Mode, tap the My Favorite Mode
key.
Detection
area
key.
indicator will light up.
Ultrasound sensor
indicators will flash 3 times