Publicidad
Remote Control Pairing
Remote Pairing
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event that the
remote is not paired with the base, follow the steps below.
STEP 1
Unplug the Power Cord from your power outlet. Wait 1 minute, then
plug it back in to your power outlet. Perform Step 2 within 10 seconds,
while the control box light is flashing.
Power Supply
AC Power Cord (Europe)
Uncoil input Power Cord (connected to Control Box's power port) and
plug into Power Supply. Please use the AC Power Cord for beds
shipped to Europe.
AC Power Cord (UK)
Uncoil input Power Cord (connected to Control Box's power port) and
plug into Power Supply. Please use the AC Power Cord for beds
shipped to the UK market.
12
Power Cord
STEP 2
Remove the back cover of the
remote, press and hold down the
PAIR button. The PAIR button will
illuminate blue and start flashing.
When the PAIR button stops flashing,
the illuminated light on the control
box will stop flashing. Release the
PAIR button. The remote is now
paired to the adjustable base.
STEP 3
Test all remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process again.
PAIR
Button
Publicidad
