Cleaning
ATTENTION! PROPERTY DAMAGE!
►
Do not use aggressive or abrasive cleaners, as these may
damage the surface of the appliance.
Do not clean the motor unit 6 in the dishwasher.
►
Cleaning the blender jug
Unscrew the blender jug 3 anticlockwise off the motor unit 6.
♦
Clean the lid 2 and the blender jug 3 in a mild soap solution.
♦
If necessary, use a long-handled washing up brush to clean the
blender jug 3.
If you clean the blender jug 3 directly after use, you can
♦
usually achieve sufficiently hygienic cleaning results by using the
following alternatives:
Fill the blender jug 3 with 450 ml of water and add a few drops
of mild detergent. Close the lid 2 and fit the motor unit 6.
Shake the blender jug 3 once, switch the appliance on and
allow it to run for 5 seconds. Remove the motor unit 6 and
rinse the blender jug 3 and lid 2 out with clean water so that
all detergent residues have been removed.
NOTE
You can also wash the lid 2 and the blender jug 3 with
the whisk 5 in the dishwasher. If possible, place the items
in the upper dishwasher basket and ensure that they are
not jammed.
♦
Dry all parts thoroughly before reassembling them.
SPS 450 A1
GB │ MT
│
63
■