Publicidad
Idiomas disponibles
Idiomas disponibles
If your device switches off or mutes, the remote is ready
4
for use.
If the device does not switch off or mute, repeat steps 4-5
4
using another code.
If no buttons are pressed for 30 seconds, the remote exits
4
programming mode and the LED switches off.
Programming the product to the device
manually
1. Switch on your device.
2. Press and hold the TV button A
The LED indicator A
4
lights up.
4
3. Aim the remote at your device.
4. Press the channel up button A
press the channel down button A
code.
When your device switches off, the code is correct.
4
5. Press the OK button A
w
The LED indicator A
4
switches off and the code is saved.
4
6. Aim the remote at your device.
7. Press the on/off button A
1
the product.
If your device switches off or mutes, the remote is ready
4
for use.
If your device does not switch off or mute, follow the steps
4
in the next chapter.
If no buttons are pressed for 30 seconds, the remote exits
4
programming mode and the LED switches off.
Automatic search
1. Switch on your device.
2. Press and hold the TV button A
The LED indicator A
4
lights up.
4
3. Aim the remote control at your device and press and hold
the on/off button A
1
for 3 seconds.
The LED indicator A
4
flashes once every 2 seconds when a
4
new code is sent out.
When your device switches off, the code is correct.
4
4. Press the OK button A
w
The LED indicator A
4
switches off and the code is saved.
4
5. Aim the remote at your device.
6. Press the on/off button A
1
the product.
If your device switches on, the remote is ready for use.
4
If your device does not switch on or mute, follow the steps
4
in the next chapter.
r
for 3 seconds.
5
to try the next code and
6
to try the previous
to confirm.
or the mute button A
4
to test
r
for 3 seconds.
to confirm.
or the mute button A
4
to test
6
Automatic search for TV/SAT
1. Switch on your TV or SAT.
2. Press and hold the TV button A
3. Aim the remote at your device.
4. Press and hold the mute button A
The LED indicator A
flashes rapidly while trying multiple
4
4
codes.
After one batch of codes, the LED indicator A
4
for 15 seconds and then switches off.
When your device is muted, the correct code has been
4
found within the batch of codes.
5. Release the mute button A
Every 3 seconds, the product tries one of the codes from the
4
batch to find the correct code.
6. When your device is unmuted again, press the OK button
A
w
to confirm.
The LED indicator A
4
switches off and the code is saved.
4
7. Aim the remote at your device.
8. Press the on/off button A
1
the product.
If your device switches off or mutes, the remote is ready
4
for use.
If your device does not switch off or mute, follow the steps
4
in the next chapter.
Automatic brand search
1. Switch on your device.
2. Open the code list.
The codes are arranged in order of brand, device, type.
4
3. Check if the brand of your device is listed.
4. Check what button corresponds to your brand.
5. Press and hold the TV button A
6. Press and hold the buttons corresponding to your brand
together for 5 seconds.
7. Release the buttons when the LED indicator A
times.
8. Aim the remote at your device.
9. Press and hold the on/off button A
10. Every second, the product tries a new code.
11. When your device switches off, the code is correct.
12. Release the on/off button A
The LED switches off and the code is saved.
4
13. Aim the remote at your device.
14. Press the on/off button A
1
the product.
r
for 3 seconds.
.
4
lights up
4
4
.
or the mute button A
4
to test
r
for 5 seconds.
4
flashes 3
1
.
1
.
or the mute button A
to test
4
7
Publicidad
