Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
NOTE:
•
For optimum playback, make sure only compatible audio files (MP3, WMA or
WAV) are saved on the USB device or TF card.
•
SD will be displayed on the screen when you are in TF mode.
Pairing with a Bluetooth (BT) device
To connect this speaker to a Bluetooth device, you must first pair the speaker with the device.
1.
Switch on the Bluetooth device (such as your phone or tablet):
•
Go to your device's settings.
•
Enable the Bluetooth function.
NOTE: If your Bluetooth device was previously connected to another device, remove
that connection before attempting to connect the device to the speaker.
2.
To turn on the speaker, slide the ON/OFF POWER SW to the ON position. bLUE will then
flash on the screen. If the speaker is already turned on and/or another mode is active,
press the MODE button until bLUE flashes on the screen. The speaker will automatically
enter pairing mode to search for the Bluetooth device.
3.
When the Bluetooth device displays the speaker's Bluetooth name, EDENWOOD PARTY250,
select the name and confirm the pairing process.
4.
bLUE will stop flashing when the devices have paired.
NOTE:
•
If the speaker's Bluetooth name does not appear on your Bluetooth device,
move the two devices closer together. If that doesn't work, turn the devices
off and back on again before restarting the pairing process.
•
When pairing the units, make sure they are less than 10 metres apart and
there are no physical obstructions between them.
•
Once paired, the devices should remember the connection and you shouldn't
need to pair them again.
23
EN
Publicidad
