Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Features:
1 Characterized with a general power switch to allow this unit be power off when
is not in using.
2 Two heatings and cool shot.
3 Slightly press on the spring button to turn on and work, release that switch to
turn off.
A dryer body - B holder - C switch - D socket
E spring button - F chrome - G power switch
Warning: Don't install the hair dryer in the places easy wet.
How to install this unit with plug connected wire:
1 Loosen the screw which on the bottom of the dryer holder, disassemble the
front cover (fig. 3)
2 Drill 4 holes of 6mm diameter and depth of 35mm on the wall then insert the
plastic toggles into the holes according to fig. 2 and fix the bracket on the wall with
the 4 screws enclosed
3 Fix the front cover to the bracket then screwing the screw on the bottom to
make the bracket and front cover tightly
4 Connect with general power and move power switch to "ON'position
20
Publicidad
