Derungs Dmed Triango 100 Instrucciones De Montaje página 29

CAUTION
Observe the position of the wall bracket

Alignment of the wall bracket must be under-
taken according to the axis in the picture

Failure to comply with correct alignment will
compromise mechanical safety

We recommend using a counter-plate on
lightweight construction walls (not included
with delivery).

Make 4 bore hole markings (10mm dia. min.);
consider the position of opening A for the elec-
trical connection

Check the distances between them

Drill holes and blow out with a bellows

Hold the ceiling bracket on the ceiling and
hammer
4 fastening anchors using a hammer

Tighten the fastening using manufacturer
instructions
A
in the
DANGER
Electric shocks are life-threatening.

Switch off the fuse before working on the
power connection

This device may only be connected to a
mains power supply with a protective earth
conductor (PE) to prevent any risk of an elec-
tric shock

Create the power connection
3
4
metric

Place wall angle 1 (with end ring 2 and hood 3
in position) in the wall bracket 4 and simultane-
ously pull plug through the rectangular cutout
6
1
metric
4
metric
2

Wall angle in vertical alignment, mount with
M8 self-locking 1 bolt and nut and tighten
slightly
ENG
3
2
1
29