Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
4. Inserting a tool
-
Insert the tool with the rear retaining collar into the device
-
Snap the tool into the click system by pressing on the tool
12
base plate
You do not have to observe the position of the eccentric drive when changing tools. When switching on, the
gearbox eccentric moves independently into the corresponding recess on the tool.
The device is ready for use again.
Switching on/switching off the device
CAUTION! Risk of injury!
-
Remove the blade guard before each use and replace it after use and during interruptions.
-
Firmly hold the device until the tool stops.
1. Switching the device on
-
Take the device by the handle.
-
Remove the blade guard
-
Firmly grip the handle and slide the switch lock
forward with your thumb.
11
-
Now press the switch
-
Once the device starts, you can let go of the switch lock.
2. Switching the device off
11
-
Let go of the switch
.
-
Hold the device firmly until the tool stops.
3. Interrupting or finishing work
7
-
Attach the blade guard
Working with the grass cutters
The grass cutters are used to trim hard-to-access lawn sections and edges that cannot be trimmed with lawn mowers or grass
trimmers.
Working with shrub cutters
Always operate the blade pointing away from your body, never towards it.
Search hedges and bushes before cutting for concealed objects, such as wire fences, and remove these if necessary.
34
7
3
/
.
8
with your index finger.
3
/
.
4
12
1
5
11
8
Publicidad
