Descargar Imprimir esta página

IKRA GGS-I-190 Instrucciones De Manejo página 36

Cortadora de hierba y arbustos, con acumulador

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 73
Storage
1. Thoroughly clean the device (see "Cleaning").
2. Store the battery at 50–80% capacity. If the battery is stored for over 6 months, check the charge level after this period and
recharge the battery if necessary.
3. If possible, pack the device in the original packaging.
4. Store the device in a location away from sunlight and other heat sources.
5. Store the device and accessories at a temperature between +10 °C and +30 °C.
Transport
Transport the device and its accessories in the original packaging and protect them from blows and vibrations.
Troubleshooting
Problem
Motor does not run.
Inadequate performance,
uneven running.
If the problem persists, contact the customer service listed on the last page.
Technical data
Battery/operating voltage
Type of battery
Max. operating time
Idle speed n
0
Sound power (EN 62841-4-2 and EN 50636-2-94)
Sound pressure level L
(EN 62841-4-2 and EN 50636-2-94)
pA
Vibration (EN 62841-4-2 and EN 50636-2-94)
Charger
Mains voltage
Charging voltage
Charge current
Rated input
Grass blade
Cutting width
Weight incl. device
Shrub blade
Cutting length
Cutting thickness
Weight incl. device
Total vibration value
The stated total vibration value and the stated noise emission values have been measured according to a standardised test
procedure (EN 62841-4-2 / EN 50636-2-94) and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of the exposure.
36
Possible cause
Battery empty.
Battery faulty,
switch defective.
Motor's overload protection triggered because the
motor is overloaded or overheated.
Blade blocked by plant residues or foreign
objects.
Insufficient lubrication.
Blunt or defective blade.
Remedy
Charge the battery.
Contact customer service.
Allow the device to cool down for 15–20
minutes.
Check the blade and remove any foreign
objects.
Treat the blades with care spray and
grease the drive section.
Sharpen or replace blade.
V DC
7.2
Ah/Wh
2.2/15.8/lithium-ion
min.
130
min
1000
-1
dB(A)
90
dB(A)
76 k=3.0 dB(A)
m/s
<2.5 k=1.5 m/s
2
2
BI12TA-095080-AdV
V AC/Hz
100-240 / 50/60
V DC
9.5
mA
800
W
7.6
mm
75
kg
0.64
mm
160
mm
7.8
kg
0.7

Publicidad

loading