Default values as shown.
18
DISPLAY OPTIONS
FRANÇAIS - PG 22
HOME SCREEN
Displays details about the battery's voltage, and shows what is
connected to the solar regulator. This view has no further function
or settings.
The home screen will be displayed after 10 seconds of inactivity.
FLOAT VOLTAGE
Float voltage is the charge stage the regulator automatically activates
when the battery is near full capacity, to prevent over-charge.
To set your float charge voltage, long press
with
or
. Refer to below table for recommended voltage.
DISCHARGE RECONNECT
When the battery's voltage is above this figure, the load connected to
the regulator's
output will be powered.
To set this figure, long press
DISCHARGE STOP
When the battery's voltage is below this figure, the load connected to
the regulator's
output will have its power disconnected.
To set this figure, long press
POWER TIMER
This setting controls how long the regulator supplies power to the
24H -
Provide power to the
1-23H - Provide power to the
0H -
Only provide power to the
*The battery voltage must first meet the discharge stop/reconnect settings.
BATTERY TYPE
Displays the battery type connected to the regulator. This function will
automatically detect a 12V or 24V connection.
To set a specific battery type, long press
with
or
.
ESPAÑOL - PG 26
and edit value
and edit value with
and edit value with
Long press
to edit value with
output day and night.
output for set duration after dark.
output when dark.*
See table on next page for individual options.
and edit value
or
.
or
.
or
.
output.