INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■
Pliers (that open to 1®/i6" [39.5 mm])
■
Flashlight (optional)
Tools needed for installation
■
Open end wrenches 17 mm and 13 mm
■
Level
■
Wood block
■
Ruler or measuring tape
NOTE:
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Record hose installation or replacement dates for
future reference.
Parts supplied:
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
£ Beaded strap
Alternate Parts
Parts listed are available from your local Sears store or Sears
Service Center. For further information, please call
1-800"4"MY"HOME® (1-800-469-4663).
If You Have
You Will Need to Buy
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
Overhead sewer
Standard 20 gal. (76 L), 30" (76.2 cm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose, Part
Number 8318155; and connector kit, Part
Number 285835
Drain hose too
short
4 ft (1.2 m) drain hose extension kit,
Part Number 285863
Water faucets
beyond reach of fill
hoses
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (25.4 cm) or a
15.5" (39.4 cm) pedestal. Remember that the pedestal will add to
the total height of the washer.
A. 10" (25.4 cm) pedestal
B. 15.5" (39.4 cm) pedestal
This pedestal (with storage drawer) is available in several colors.
To order, call your local Sears store. For further information,
please call
1-800-4-MY-HOME® (1-800-469-4663).
.
Pedestal
Height
Approximate
Height with
Washer
Color
Part
Number
10" (25.4 cm)
48" (122 cm)
White
46822
15.5" (39.4 cm)
53" (135 cm)
White
57822
Stack Kit
Are you planning to stack your Kenmore washer and dryer? To do
so, find the stack kit (8541503) in the drum of the matching
Kenmore dryer. Follow instructions included with the kit. See
"Location Requirements."
5