Descargar Imprimir esta página

Kenmore ELITE 110.4789 Serie Manual De Uso Y Cuidado página 18

Lavadora automatica de carga frontai

Publicidad

Idiomas disponibles

Idiomas disponibles

Modifiers
Preset cycle settings of Water Temperature, Spin Speed, and
Rinse Options can be changed. You can change a modifier after
starting a cycle anytime before the selected Modifier begins. Not
all Modifiers are available with all options and cycles. Available
modifier settings will glow amber. Current selections will glow
green. If an option is unavailable with a selected cycle, the light
will not illuminate.
MODIFIERS
\
Hot
1 High
A
AUTO
1 Warm*
1 Medium
1 Heavy
con4w! 1 Warm
1 Low
1 Normal
1 Cool
1 Extra Low
1 Light
1 Cold
1 No ^in
o
o
o
Soil Level
Wash Temp
• WARM WNSE StLfcCriON
Spin Speed
To change cycle time, select SOIL LEVEL button.
To change the water temperature, select the WASH TEMP
button until the desired setting glows green.
To change the spin speed, select the SPIN SPEED button
until the desired setting glows green.
Wash Temp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difficult to
remove.
Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned on when a cycle is
selected. (See "Preset Cycle Settings" in "Cycles.")
ATC works for the wash temperature with Hot, Warm, Cool
and Cold settings.
The Cold wash temperature depends on the cold water at
your faucet.
ATC works for the rinse temperature where the wash temp
setting is marked with an asterisk, such as Warm*. All other
rinse temperatures are cold.
Laundry Guide
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
CYCLE
SUGGESTED LOAD TYPE
AVAILABLE OPTIONS
Prewash
2nd Rinse
Extended
Spin
Delay
Start
Cycle
Signal
Normal/Casual
Normally soiled blouses, shirts, overalls, etc., made of
polyester, nylon, cotton, linen, or cotton blends
Heavy Duty
Heavily soiled underwear, towels, shirts, etc., made of
cotton
Whitest Whites
Soiled white fabrics
Clean Washer
No clothes
Rinse/Drain &
Spin
All loads
Handwash/
Delicate
Silk or Ultra Delicate fabrics identified as machine
washable.
Express Wash
Small loads of 2-3 lightly soiled cotton, polyester, nylon,
and cotton blends.
Soak
All loads
18

Publicidad

loading

Este manual también es adecuado para:

Elite 110.4785 serieElite 110.4788 serie