Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATINGINSTRUCTIONS
ADDING RINSE AID TO THE DISPENSER
The use of rinse aid products is recommended
to
prevent spots on dishes from water droplets
remaining after the completion
of the wash cycle,
and to enhance the performance
of the dry cycle.
NOTE: Only use liquid rinse aid in this
dishwasher.
f
Rotate the round cap counterclockwise
to
remove it.
Add a liquid rinse aid to the maximum fill
level (max. 4.8 oz [145 ml]).
J
Replace the cap and turn clockwise to lock.
Rinse aid will be dispensed automatically
during the final rinse cycle.
RINSE
AID DISPENSER
ADJUSTMENT
The rinse aid dispenser is factory-set to level 3,
which should provide
Rinse Aid Indicator Eye
Adjustment Lever
the best performance
under most conditions.
Setting the rinse aid
control too low will
contribute to spotting
and streaking of dishes
and poor
drying performance.
Setting the control too high can cause foaming,
which will cause poor wash performance.
To adjust the rinse aid dispenser setting, remove
the cap and adjust the rinse aid lever to the
desired setting.
REFILLING
THE RINSE
AID
The capacity of the rinse aid dispenser is 4.8 oz
(145 ml). How often the dispenser will need to be
refilled depends on how often dishes are washed
and the rinse aid setting used.
If the rinse aid level is low, the Rinse Aid light on
the control panel will illuminate.
NOTE :
The dispenser also has a round Rinse Aid
Indicator Eye that is dark when the dispenser
is full and light when it is empty.
Publicidad
