Akai AM-59 Manual Del Usuario página 6

Before proceeding DIGITAL 1 (OPTICAL) IN/OUT ter-
e Turn off the power of all components before making connec- realtek) tsa ( rN
esto maptvere (sy only)
tions.
¢ Whenconnecting components tothe DIGITAL2and3INter-
These terminals are for connection of CD players or DAT decks
minals, use digital connection cords available from your —_ equipped with optical terminals.
audio dealer. x e n : :
e If your DAT deckis equipped with optical input and output ter- Note:
minals, connect it to the DIGITAL 1 (OPTICAL) IN andOUT ~—s» ~When you are not using the DIGITAL 1 (OPTICAL) IN/OUT
terminals of the amplifier using optical fibre cables.
terminals do not remove the terminal caps.
e Always replace the terminal caps of the DIGITAL 1 (OPTI-
CAL) IN and OUT terminals when a component is not con-
nected to them.
e if your CD player is equipped with both an optical terminal
and analog output terminals, we recommend that connection
only be made to the optical terminal for best sound reproduc-
tion.
® The digital audio signal is a composite signal made up of the
left and right channel signals. For this reason, separate left
and right INPUT and OUTPUT terminals are not necessary.
| OPTICAL |
DAT deck or CD piayer
For DAT deck
OUT
|
DIGITAL 1
(OPTICAL)
DIGITAL OUTPUT
COAXIAL
DIGITAL 2
iN
DIGITAL 3
CD piayer
CD player
(m4)