Akai AM-59 Manual Del Usuario página 9

Operation details
SPEAKERS BALANCE
TREBLE
BASS
PHONES
SOURCE DIRECT
STEREO INTEGRATED AWPLFIER AM-09
MODE
LOUDNESS MUTING(- 20dB)
SOURCE DIRECT switch
The SOURCE DIRECT switch is used to help improve sound
quality by selecting the shortest circuit route through the ampli-
fier that the playback signal has to travel.
When set to DIRECT:
The subsonic filter, MONO/STEREO MODE select circuit, tone
control circuit and balance control circuits are by-passed.
When set to OFF (SUBSONIC):
The playback signal is routed through the subsonic filter, tone
control circuit and balance control circuits.
During record piayback this position can be used to reduce ultra
low frequency noise, rumble, hum ete. (indicated by woofer vi-
bration during playback).
Note:
e The subsonic filter removes low frequency signals (18Hz or
lower) that are present in the playback signals.
Treble and bass tone adjustment ©
1 Set the SOURCE DIRECT switch to OFF (SUBSONIC).
2 Use the BASS and TREBLE controls as follows:
Bass adjustment
To increase the level:
Turn the BASS control toward +10.
To decrease the level:
Turn the BASS control toward -10.
To defeat the control:
Set the control to 0.
Treble adjustment
To increase the level:
Turn the TREBLE control toward +10.
To decrease the level:
Turn the TREBLE control toward -10.
To defeat the control:
Set the control to 0.
st-
2 Use the BALANCE control as follows:
To decrease the right channel volume:
Turn the BALANCE control to the LEFT.
To increase the left channel volume: _
Turn the BALANCE control to the RIGHT.
Moye re layexoxomere) it) olcvarcr-ltcel a
To engage loudness compensation:
lM Press the LOUDNESS button ON.
To resume the normal volume level:
@ Press the LOUDNESS button again.