JAP FUSIONESCO FORCE BLEND F3 Manual Del Usuario página 23

CHANGING BLADES / DISCS
Disassemble the food processor step by step. Be careful not to cut yourself.
1. Remove the lid of the food processor container by turning it counter clockwise. (FIG 1.)
2. Pull out the hopper's ring lock. (FIG 2.)
3. Remove the grinding blade by pushing the hopper's ring lock downwards slowly. Be careful
not to cut yourself.
4. Place back the hopper's ring lock. (FIG 3.).
5. Place one of the discs (shredding or slicing) on top of the hopper's ring lock. Align the
hole in the center of the disc with the shaft and make sure it is tightly attached by pushing
downwards gently. Place the disc and the shaft in the center of the food processor
container. (FIG 4.)
6. Place the lid of the food processor container back and lock it by turning it clockwise. (FIG 5.)
7. To attach the grinding blade, hold it carefully in one hand while placing the shaft through
the center of the grinding blade with the other hand. The blade should be placed at the base
of the spindle. Place the grinding blade and the shaft in the center of the food processor
container.
NOTES:
• Do not use one of the discs and the grinding blade at the same time.
• The discs are reversible to switch between coarse or fine shredding/slicing.
FIG 1.
23
FIG 2.