Publicidad
Idiomas disponibles
Idiomas disponibles
Press the safety button (1) and, without releasing it,
pull the trigger (2) towards the grip. Then release the
safety button (1).
6.5. TRANSPORTATION WHEELS
Attention: To work with the motorized tiller, the
transport wheels must be in the working position.
To place the wheels in the working position, remove
the pins and pins and turn them over as shown in fig.
7. Then reposition the bolts at the desired working
height and secure with the pins.
6.5.3. CHECK POINTS AFTER START-UP
It is important to pay attention to possible loose parts
or and the temperature of the machine. If you detect
any anomaly in the machine, stop immediately and
check it carefully. In the event of any anomaly or
problem, take the machine to the technical service for
repair. Under no circumstances continue to use the
machine if it does not seem to be working properly.
Do not use the machine if it is damaged or
incorrectly adjusted.
7. MACHINE USAGE
Use this machine only for those purposes for which
it has been designed. The usage of this tiller for any
other purposes is dangerous and can cause damages
to the user and the machine.
Do not get anywhere near to the blades
when the machine is working.
If you lose your balance or fall, let go of the handle
switch immediately.
Do not solely rely on the security measures of this
machine. Use common sense at all times.
Do not use this machine if you are tired, sick, are
taking medicines, or if under the effect of alcohol or
drugs. Lack of sleep and fatigue can cause accidents
and damages.
Do not use this machine at night, with fog or with
reduced visibility. You must see the working area
clearly at all times.
Limit the usage of the machine to 10 minute stints
and rest for a further 10 to 20 minutes in between
sessions.
Never leave this machine unattended.
33/112
English
Publicidad
