Garland MULE KEEPER 40V 742 R Manual De Instrucciones página 36

English
Unplug the machine before carrying out any work
on the machine. Read the instruction manual before
carrying out any maintenance work.
Attention! The blades do not stop automatically
once the engine has been stopped.
8.1. MAINTENANCE AFTER WORKING WITH THE
MACHINE
Carry out the following checks when you have finished
working to ensure that the machine works well in the
future.
8.1.1. GENERAL CHECKS
- Check that the blades are well adhered to the
transmission. Tighten if necessary.
- Check the sharpness of the blades. Sharpen or
substitute the blades when necessary. We
recommend that this is done at your nearest after
sales service.
8.1.2. CLEANING THE BLADES AND THE MACHINE
Attention! Always clean the machine after use.
Not cleaning the machine adequately could cause
damages to the machine and could make the
machine work worse in the future.
Attention! The blades are sharp and can cause
damage. Use protection gloves when cleaning the
machine.
Wherever possible, always clean the machine
immediately after use. Clean the bottom part of
the transmission and around the blades and the
protecting shield with a soft brush and a cloth with a
mixture of soap and water. Never throw water over the
machine!
To eliminate soil from the blades and transmissions
use a hard brush or a wet cloth.
Clean the ventilation windows and eliminate grass and
soil remnants.
Once the machine has been cleaned, lubricate the
blades lightly with some oil.
8.2. PERIODIC MAINTENANCE
Carry out periodic inspections on the machine to
ensure its adequate and efficient use. Once, each
season take the machine to your nearest after sales
service for a complete maintenance.
Maintain the machine clean and especially the
ventilating windows.
Always use original spare parts to guarantee the best
performance of the machine and to avoid risks and
dangers to the user. These spare parts should be
purchased in your nearest after sales service.
The use of non original and official spare parts can
cause accidents, personal damages to the user and
can cause the machine to break.
36/112