Atlas Copco LTV29-2 R30-10 Instrucciones Del Producto página 3

LTV29-2 R30-10 EN Safety and operating instructions
Safety and operating instructions
Safety instructions
Warning
Make sure you are familiar with the operating instructions before you use the machine.
Before making any adjustments (e.g. setting the torque, changing bits) disconnect the machine from the
compressed air line.
The machine, together with any attachments and accessories, must never be used for anything other than
the designed purpose.
Use power sockets only. For safe and economic use - replace worn sockets.
Check that the power socket is properly fastened - replace the square drive retainer when necessary.
Keep your fingers and loose articles (cloths, hair) away from the outgoing shaft.
Do not use gloves.
Hold the machine correctly and be aware of the reaction force.
Never use the nutrunner without making sure that the clutch releases. Be aware of fluctuations in air pres-
sure.
Check the direction of the rotation before using the machine.
When working in close spaces without the use of a torque reaction bar - there is a risk of injuries due to
squeezing.
The operators of a nutrunner with a torque reaction bar should take particular care to avoid injuries due to
squeezing. Never put your hand on or close to the torque reaction bar while the machine is being
used.
When using a suspension yoke, check that it is in good condition and correctly fastened.
Installation of vibrating tools
It is recommended that a minimum length of 300 mm of flexible hose for compressed air is inserted be-
tween a vibrating tool and the quick-action coupling.
General information
EC DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB, S-105 23 STOCKHOLM, SWEDEN declare that the product
(with name, type and serial number, see front page) is in conformity with the following Directive(s):
2006/42/EC
Harmonised standards applied:
ISO 11148-6
Technical file available from:
Quality Manager, Atlas Copco Industrial Technique, Stockholm, Sweden
Stockholm, 1 July 2013
Tobias Hahn, Managing Director
Signature of issuer
Installation
Installation of vibrating tools
It is recommended that a minimum length of 300 mm of flexible hose for compressed air is inserted be-
tween a vibrating tool and the quick-action coupling.
© Atlas Copco Industrial Technique AB - 9836 9451 00 3