Publicidad
Idiomas disponibles
Idiomas disponibles
EN
4. Install the rear grid, plastic nut, blades, and blade spinner to the motor shaft and fix in place.
4.
2.
3.
5. Install the front grid and net frame, and secure using the screw on the net frame. Inset the upper flexible
hose into the mist vent that is located at the front of the fan grid (ensure the hose is free of kinks)
5.1.
2.3. Tank assembly instructions
6. Put the water tank on the mist generator, ensuring it is
appropriately seated in the recess.
7. Fit the cover to the top of the water tank.
8. Insert the lower flexible hose of the fan body into the water tank
cover (ensure the hose is free of kinks)
2.4. Filling the water tank
5.2.
Take off the cover of the water tank.
Fill the tank with cold and clean water, making sure not to overfill it.
Attention!
• Ensure the product is unplugged from the mains before filling or
refilling the water tank.
• Only use water in the water tank. Do not add any chemicals, oils, or
other additives.
• The water must not be warmer than 50°C.
5.3.
6.
11
Publicidad
