Publicidad
Idiomas disponibles
Idiomas disponibles
EN
C. Wind Speed Button
1. Press the Power "ON/OFF" button to switch the fan ON.
2. Set the fan speed from three options (Low-Medium-High) by pressing the "WIND SPEED" button
several times. The LED light will show low speed, medium speed, and high speed correspondingly.
D. Mode Button
The wind mode can be adjusted by pressing the "MODE" button.
▪ Normal: The fan will operate in high, medium, or low mode as set.
▪ Natural: The fan will operate at low, medium, and high speeds in different patterns to provide a
wind flow that replicated natural airflow.
▪ Sleep: Sleep mode can operate at low, medium, and high speeds. In sleep mode, the wind speed will
decrease in set patterns before operating at a low speed until shut down.
E. ON / OFF Button
1. Press the "ON/OFF" button to switch the fan on or off.
2. Every 72 hours, the control panel lights flash to indicate that the water tank needs to be cleaned. Press
the "ON/OFF" button 5 seconds to reset.
F. Oscillating Button
When you press the "OSC" button, the mist fan head will move continuously from side to side. Pressing
the button again will stop the oscillation of the mist fan.
3.2. Remote control
Your fan is supplied with a remote, which allows full control of all the units
functions.
The buttons on the remote have the same effect as the buttons on the main control
panel.
Inserting batteries
Insert 2 AAA 1.5V Alkaline type batteries into your remote control
1. Flip the backside of your remote control and pull out battery cover. Insert
the batteries in accordance with the instructions and polarity of the batteries.
2. Change the batteries in the same way described above.
Warning:
1. Replace the old batteries with the same type batteries. Otherwise, your
heater may not function well.
2. Pull out the batteries in case of long terms of disuse to prevent leakage which
may impair your remote control.
3. Do not allow water or liquid to get into the remote control.
13
Publicidad
