Taurus WALK ON WATER Manual Del Usuario página 8

English
High pressure cleaners
Walk on Water
Walk on Water +
DESCRIPTION
A Pump switch on/off
B Water Connection tuve (not included)
C Water Inlet*
D High pressure tube
E Water Outlet*
F Spray gun
G Extension Pipe
H Spray nozzle pipe
I Handle
J Detergent conatiner*
K Soap Nozzle*
L Mains power cord
M Tip Cleaner
(*) Change position depending on the model.
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Check the position of power cables before
commencing work ensuring they are well away
from the work area.
- Do not use the appliance if the parts or acces-
sories are not properly fitted.
- Do not use the appliance if the accessories
or consumables attached to it are defective.
Replace them immediately.
- Do not switch the appliance on without connect-
ing it to a water supply.
- Do not use the appliance if the on/off switch
does not work.
- Do not use the appliance if it is tipped up and do
not turn the appliance over while it is in use or
connected to the mains.
- This appliance is for household use only, not
professional, industrial use.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Use the appliance and its accessories and tools
in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use the appliance for
operations different from those intended could
result in a hazardous situation.
- Never leave the appliance unattended while in
use.
- Do not use the appliance with pets or animals.
- Do not use the appliance on any part of the
body of a person or animal.
USE
MOUNTING THE APPLIANCE
- Attach the High-pressure tube to the water
outlet of the machine ensuring that's is well
connected (Fig.1 Change position depending on
the model).
- Attach the spray gun to the high-pressure tube
(Fig. 2).
- Mount the extension pipe (Fig. 3), the soap
nozzle (Fig. 4) or the spray nozzle pipe into the
spray gun (Fig. 5)
- Connect the machine to water and power
supplies.
- NOTE: If you notice that the appliance have
some loses in water connections, you could use
teflón tape in order to improve this connections.
- WARNING: Ensure that high-pressure tube is
completely uncoiled before any use.
- WARNING: The water entering to the appliance
should not exceed the 50ºC.
PRE-OPERATION
- Useful information for during the use.
- WARNING: Before adjusting any kind of the
features this appliance includes, switch off the
appliance, turn off the water supply and discon-
nect the appliance from the mains.
ADJUSTING THE WATER JET OUTLET
- The angle of spray coming out the appliance
can be adjusted by rotating the nozzle. This
will vary the spray patter approximately from a
narrow stream (high impact) to a 60º wide fan
spray.