RS Pro RS-380 Manual De Instrucciones página 3

AC Clamp Meter/English
• Inspect the condition of the test leads and the meter itself for any
damage before operating the meter. Repair or replace any damage
before use.
• Use great care when making measurements if the voltages are greater
than 30VAC rms or 60VDC. These voltages are considered a shock
hazard.
• Remove the battery if the meter is to be stored for long periods.
• Always discharge capacitors and remove power from the device under
test before performing Diode, Resistance or Continuity tests.
• Voltage checks on electrical outlets can be difficult and misleading
because of the uncertainty of connection to the recessed electrical
contacts. Other means should be used to ensure that the terminals are
not "live".
• If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
Function
A AC
V DC, V AC
Resistance, Diode, Continuity ,TEMP
Meter Description
2
Input Limits
Maximum Input
400A
600V DC/AC
250V DC/AC
1. Current clamp
2. Lighting LED
3. Non-contact AC voltage indicator light
4. Lighting LED button
5. Clamp trigger
6. Rotary Function swith
7. Data Hold button
8. MODE select button
9. Range button
10. Back light button
11. LCD display
12. COM input jack
13. V CAP TEMP jack
14. Battery Cover
1. AC DC AC (alternating current)
and DC (direct currrent)
2. Minus sign
3. 8.8.8.8 2000 count (0 to 1999)
measurement reading
4. AUTO AutoRange mode
5. REL Relative mode
6. Diode test mode
AC Clamp Meter/English
3