ARDES ARFRYA09GP Folleto De Instrucciones página 21

Problem
The appliance does not work
The display shows "no Pot"
Food is not cooked
Cooking food is not
uniform
Fried foods are not crispy
White smoke escapes
from the appliance
The display shows "E1"
The display shows "E2"
Appliance goes into standby
mode during cooking and keys
do not work
(EN) TROUBLESHOOTING
Cause
Timer off
Container has
inserted correctly
Too much food in basket
Set temperature is too low
Set time is too short
Food was not mixed during
cooking
Foods suitable for conventional
oil frying have been used
Fatty ingredients
Container contains
residue from previous use
Open circuit of
temperature sensor
Short-circuit of
temperature sensor
Over temperature: temperature
has exceeded 230°C and the
appliance has
cooking.
21
Solution
Set timer
not been Remove container and insert
again
Reduce quantity of food in
basket
Increase cooking temperature
Increase cooking time
Cook for a few more minutes,
while mixing the food, see
section "PROGRAMMES AND
SETTINGS"
Use foods suitable for cooking
in the oven or consult the
"PROGRAMMES AND
SETTINGS" section
As indicated in the
"PROGRAMMES AND
SETTINGS" section, avoid
cooking excessively fatty foods
greasy Clean container and/or basket
thoroughly after each use
the NTC Turn off the appliance, and
remove the plug from the
socket. Contact assistance
the NTC Turn off the appliance, and
remove the plug from the
socket. Contact assistance
Five beeps are emitted every
minute until the temperature
stopped drops low enough for cooking
to resume.