voestalpine bohler welding TERRA NX 320 SMC Classic Manual De Instrucciones página 71

5.2.3 Circuit resistance calibration (set up 705)
705.
705.
10.0
6. ACCESSORIES
Push-Pull kit
73.11.012
7. MAINTENANCE
Routine maintenance must be carried out on the system according to the manufacturer's instructions. When the
equipment is working, all the access and operating doors and covers must be closed and locked. The system must
not be modified in any way. Prevent conductive dust from accumulating near the louvers and over them.
Any maintenance operation must be performed by qualified personnel only. The repair or replacement of any parts
in the system by unauthorised personnel will invalidate the product warranty. The repair or replacement of any parts
in the system must be carried out only by qualified personnel.
7.1 Carry out the following periodic checks on the power source
7.1.1 System
Parameter selection
MIG/MAG
Calibration
screen.
67
ACCESSORIES
0
EN
MIG/MAG
MIG/MAG