Fein AKFH18-5T AS Serie Instrucciones De Uso página 32

en
32
Repair and customer service.
Before mounting or replacing application tools or accessories, remove the
WARNING
battery. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
Lubricating the thread of the height
adjustment (figure 16).
Clean and lubricate the thread of the height
adjustment on the guide plate as required.
Unscrew the guide plate and turn out the
guide-plate holder. Clean the thread on both
sides and apply oil.
Exchangeable parts
If required, you can change the following
parts yourself:
application tools, guide roller, battery
Service.
Have maintenance carried
WARNING
out only through qualified
personnel. Incorrectly mounted leads and
components can cause serious injuries.
Have the required service carried out only
through a FEIN customer service agent.
Clean and lubricate the thread of the height
adjustment on the guide plate as required.
Unscrew the guide plate and turn out the
guide-plate holder. Clean the thread on both
sides and apply oil.
Fig. 16
1. 7.
6.
2.
5.
3.
Products that have come into contact with
asbestos may not be sent in for repair. Dis-
pose of products contaminated with asbes-
tos according to the applicable country-
specific regulations for such disposal.
For FEIN power tools and accessories in
need of repair, please contact your FEIN
after-sales service. The address can be found
on the Internet under www.fein.com.
Renew stickers and warning indications on
the power tool when aged and worn.
The current spare parts list for this power
tool can be found in the Internet at
www.fein.com.
Use only original spare parts.
TX 20
4.