Publicidad
Idiomas disponibles
Idiomas disponibles
Date Code Position (Fig. C)
The production date code
by a 2-digit week and is extended by a 2-digit factory code.
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Battery pack
1
Battery release button
2
Main handle
3
Variable speed trigger
4
Forward/reverse/lock off button
5
Spindle lock button
6
Direction indicator
7
Dust port adaptor
8
Shoe
9
Depth adjustment knob
10
Rotatable Guard
11
Hex wrench
12
LED
13
Accessory attachment location
14
Intended Use
Your cut-off tool is designed for professional cutting
applications. This cut-off tool is intended to be used to cut
different materials. Follow the information regarding the
application range of the cutting blade used.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Wheels, cutting material and metal
components on the tool such as gearcase, shoe and guard
may be hot during or after continued use. Use caution when
approaching these areas.
WARNING: Use only STANLEY FATMAX batteries
and chargers.
consists of a 4-digit year followed
30
Inserting and Removing the Battery Pack
from the Tool (Fig. C)
NOTE: Make sure your battery pack
To Install the Battery Pack into the Tool
Handle
1. Align the battery pack with the rails inside the tool's
handle (Fig. C).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the battery release button
battery pack out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some STANLEY FATMAX battery packs include a fuel gauge,
which consists of three green LED lights that indicate the level
of charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button
29
. A combination of the three green LED lights will
illuminate, designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
NOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
Wheels
WARNING: To reduce the risk of injury, only use wheels
that are no greater than 3" (76 mm) in diameter, have an
inner diameter of 3/8" and 7/16", without cutting teeth.
Thickness of wheel not to exceed 0.09" (2.2 mm). Never
force a wheel onto the machine or alter the size of the
arbor hole.
A dull wheel will cause slow inefficient cutting, overload the
motor, could cause excessive splintering, and could increase
the possibility of kickback. Please refer to the table below to
determine the correct wheel for your application.
Wheel type
Diamond** Multi‑Material
Drywall, fiber cement, plastic, steel, non‑
Wheel
ferrous materials
Bonded Reinforced Wheel
Steel, stainless steel, non‑ferrous materials
Diamond** Tile Wheel
Ceramic Tile, Porcelain and Granite/Marble/
Stone
**This blade uses manufactured diamonds engineered for cutting.
NOTE: Bonded Reinforced wheels are composed of abrasive
grains which are held tightly together by a bonding agent and
typically reinforced with a woven material.
ENGLISh
1
is fully charged.
2
and firmly pull the
Application
41
41
Publicidad
