GET SX1 LC-GPA Guia página 7

3.
Connect the ECU connector of the GL-264-AA wiring harness to the MAIN
cable of the SX1 PRO ecu unit; then connect the female connector of SX1 LC-GPA
to one of the connectors of the wiring harness as needed.
TO SX1 PRO ECU
MAIN CONNECTOR
GL-264-AA ECU
CONNECTOR
ATTENTION:
-Check that the wiring does not obstacle the free movement of the
handlebar in both directions
-Always make sure that the connectors are correctly associated;
when connecting them, a "click" is heard that indicates they are
connected correctly.
ECU
7
TO SX1 LC-GPA
GL-264-AA
CONNECTOR
TO SX1 CONTROLLER
GL-264-AA
CONNECTOR
EN