Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Engine should be running while using this inflator. See Warning Section for further
details.
HOW TO INFLATE TIRES
1. Attach quick connect air hose onto tire's valve stem and pull lever up to lock.
2. Attach battery clips to battery, positive (red) side first.
3. Press ON/OFF switch to turn on inflator. Inflate tire to manufacturer's recommended air
pressure. *When proper pressure is reached, press ON/OFF switch to turn off inflator.
Unplug power cord and remove air hose connector.
*NOTE: Correct tire pressure can be found in vehicle owner's manual.
REAMER/PLUGGER INSTRUCTIONS
1. Insert reamer/plugger tool into puncture. Slide up and down to roughen/clean puncture.
2. Thread plug through eye of the reamer/plugger.
3. Insert plug into puncture ⅔ of the way in. Rapidly pull tool out. Attach inflator and follow
instructions to inflate tire.
Publicidad
