JOCCA 2356 Manual De Instrucciones página 7

3. Screw the fixing nut clockwise until it stops.
4. Insert the blades onto the motor shaft, making sure that the blades fit
into the 2 shaft stops.
5. Screw the blade cover to the left.
6. Fit the plastic trim on the front grille and tighten the screws.
7. Insert the front protective grille by fitting the hole and the protective
clips.
8. Once the two protective grilles have been fitted, fasten them with the
screw and close all the safety clips.
CLEANING AND STORAGE
-Before cleaning, please ensure that the appliance is disconnected from
the mains electricity supply.
-Clean the appliance firstly with a slightly dampened cloth and then with
a dry cloth.
-Clean the grid from time to time with a brush to eliminate any dust that
might have accumulated on the same.
-Dismantle the fan in the opposite way to which it was assembled and
clean the blades with soapy water.
-Please do not use abrasive detergents or products that might damage
the appliance.
-Please use a damp cloth to clean the motor base.
-NEVER SUBMERGE THE MOTOR BASE IN WATER OR ANY OTHER LIQUID.
-Store the appliance in a dry place.
TECHNICAL DATA
220-240V ~ 50-60Hz 45W
Description
Maximun fan flow rate
Fan power input
Symbol Value
F 66.49
P 42.18
English EN
Unit
m /min
3
W
7