VEVOR SL-06 Manual De Instrucciones página 12

First, you need to remove the cutter head and then remove the tie rod tail
pentagram; the push plate can be removed to replace the spring. Replace
the spring, install the return groove on the push rod, fix it in place with the
pentagram, and install the cutter head. Lock the cutter head with the safety
buckle for normal use.
4.Cleaning
After slicing, the machine should be cleaned, the whole machine should be
cleaned, or the cutter head should be cleaned. After cleaning, it is
recommended to dry the water stains to keep the fuselage clean and
prevent rusting. (Note: Do not use dishwasher to clean cutter head and
fuselage)
5.Procedure of removing cutter head
( 1) Pull the buckle out and take off the safety buckle.
( 2) The cutter head can be washed, or the blade can be replaced by
drawing out the cutter head.
- 10 -