Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
3. Installing the backsplash
To mount the backslash (C) to the wall, apply a
thin bead of silicone compound (not included)
to the unpolished back side and bottom of the
backsplash (C). Position backsplash (C) as
shown onto vanity top (B) and against the
wall. Clean any excess silicone compound
before allowing it to dry.
3
C
B
6
ASSEMBLY INSTRUCTIONS
Optional step 4: Replacing optional pulls
Open the doors (or drawers), remove the
preassembled screws, change the optional pulls
and relock the screws.
CARE AND MAINTENANCE
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The sintered stone top can be cleaned using soft cloth. Avoid placing sharp ceramic and/or
heavy items on the vanity top and sink directly.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess
colorant promptly with a soft cloth.
4
7
Publicidad
