Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
HOW TO CHARGE THE BATTERY PACK
WARNING:
conditions. Water entering the charger will increase the risk of electric shock.
NOTICE:
Lithium-Ion battery packs are shipped partially charged. Before using it the
first time, fully charge the battery pack.
1. Connect the charger to the power supply
(120V~, 60Hz).
2. Align the raised ribs of the battery pack with the
mounting slots in the charger; slide the battery
pack down onto the charger (Fig. 2).
3. The charger will communicate with the battery
pack to evaluate the condition of the battery
pack.
4. When the battery pack is charging, the green LED on the charger will flash.
The power indicator on the battery pack will flash in sequence: red, orange and
green (For BA1400, BA1400-FC, BA2800, BA2800-FC, BA4200 and
BA4200-FC). The last segment of 5-LED indicator on the battery pack will flash
green (For BA1400T, BA1400T-FC, BA2242T, BA2242T-FC, BA2800T,
BA2800T-FC, BA3360T, BA3360T-FC, BA4200T, BA4200T-FC, BA4480T,
BA4480T-FC, BA5600T, BA5600T-FC, BA6720T and BA6720T-FC).
5. When the battery pack is fully charged, the green LED will stop flashing and
will shine green continuously. The power indicator on the battery pack will go
out. Wait until the fan in the charger stops, remove the battery pack from the
charger and disconnect the charger from the power supply.
6. The battery pack will fully charge if left on the charger, but it will not overcharge.
If the battery pack remains on the charger for one month or more, it will perform
self-maintenance and drop to 30% charge capacity. If this occurs, reinstall the
battery pack on the charger to recharge it fully.
Do not use the charger outdoors or expose it to wet or damp
56V CHARGER — CH2100/CH2100-FC
2
13
Publicidad
