Publicidad
Idiomas disponibles
Idiomas disponibles
5.5
Service
▪
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR FILE-/BELT SANDERS
▪
Always hold the tool with its insulated grip.
▪
The operator should hold the tool with two hands firmly.
▪
Make sure the tool is switched on before you touch the workpiece with the sanding belt.
▪
Do not touch any rotating components of the tool.
▪
This machine is not waterproof, so do not add water at the surface of work piece.
▪
When it comes to sanding operations, it is necessary to ensure a well-ventilated work area.
▪
Some of the material contained in the compounds may be toxic.
▪
Be sure to use the dust masks / respirators corresponding of the material being processed.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS
7.1
Batteries
▪
Never attempt to open for any reason.
▪
Do not store in locations where the temperature may exceed 40 °C.
▪
Charge only at ambient temperatures between 4 °C and 40 °C.
▪
Store your batteries in a cool dry place (5 °C-20 °C). Never store batteries in discharged
state.
▪
It is better for Li-ion batteries to discharge and reload them regularly (at least 4 times a
year). The ideal charge for long-term storage of your Li-ion battery is 40% of capacity.
▪
When disposing of batteries, follow the instructions given in the section "Protecting the
environment".
▪
Do not cause short circuits. If connection is made between the positive (+) and negative
(-) terminal directly or via accidental contact with metallic objects, the battery is short
circuited and an intense current will flow causing heat generation which may lead to
casing rupture or fire.
▪
Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators
and other polymer components may be damaged resulting in electrolyte leakage and/or
internal short circuiting leading to heat generation causing rupture or file. Moreover do
not dispose of the batteries in fire, explosion and/or intense burning may result.
▪
Under extreme conditions, battery leakage may occur. When you notice liquid on the
battery, proceed as follows:
− Carefully wipe the liquid off using a cloth. Avoid skin contact.
− In case of skin or eye contact, follow the instructions below:
✓
Immediately rinse with water. Neutralize with a mild acid such as lemon juice or
vinegar.
✓
In case of eye contact, rinse abundantly with clean water for at least 10 minutes.
Consult a physician.
Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do not
incinerate the battery.
7.2
Chargers
▪
Never attempt to charge non-rechargeable batteries.
▪
Have defective cords replaced immediately.
Copyright © 2022 VARO
POWDP50700
P a g e
| 6
EN
www.varo.com
Publicidad
