Yale PINAR134SS Guía De Instrucciones Para Instalación página 6

Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp
edges.
I WARNING
Supplied Part
Hood assembly with blower and
LED lamps already installed
Grease filters
5x45 mm
4x8 mm
Tools/Materials required
• Level
• Drill
• 1¼" (3 cm) drill bit
• ⅛" (3 mm) drill bit
• Pencil
• Wire stripper or knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips screwdriver
6
LIST OF MATERIALS
Remove the protective film covering the product before put-
ting into operation.
Pieces
1
20", 30", 36": 2
48": 3
4
10
Parts no supplied
Parts needed
• Home power supply cable
• 1 - ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Optional accessories and consumable parts
Duct Transition
Reducer 10"-8"
Kit No Blower
Kit No Blower
Supplied Part
Side spacers
10" round air transition
CFM Harness reduction
KIT
In Line
External
Pieces
2
1
1
# Part
ACC0185271
ACC0179549
ACC0179547