DeWalt DXPAEV016 Manual De Instrucciones página 5

Automatic Charging
• With the product powered, it starts charging few seconds after
connecting the charging handle to the vehicle's charging port.
• The product automatically detects outlet voltage and maximum
allowable input current of your vehicle.
1. Press the release lever, plug the SAE-J1772 connector
of the charging handle to the vehicle's charging port.
The charging process starts.
2. The product switches off automatically once the vehicle's
battery is fully charged.
NOTICE: When the charging is complete, press the release lever
and unplug the SAE-J1772 connector, covering the handle with
item E after use.
User Maintenance Instructions
WARNING: The product contains no user serviceable parts.
Do not attempt to repair or service any other part of the product
yourself.
WARNING: The maintenance, and servicing of the product
must only be performed by qualified personnel in accordance with
applicable local regulations
WARNING: Disconnect the charging handle from the vehicle's
charging port and switch the circuit breaker off before cleaning.
• Do not use cleaning solvents to clean any part of the product.
• Cover the charging handle with the protective cover before
cleaning.
• Regularly clean the product using a soft, dry cloth to remove
accumulated dust and dirt.
• Regularly inspect the charging cable and plug for any visible
damage or wear.
Moving and Storage Instructions
WARNING: When transporting the product, handle with care.
Do not subject it to strong force or impact or pull, twist, tangle,
drag or step on the product, to prevent damage to it or any
components.
• Cover the charging handle with the protective cover before storing.
• Protect the product from any external impact.
• Store the product in a dry indoor area and within the storage
away from children and pets.
Free Warning Label Replacement
If warning labels become illegible or are missing, please call
1-855-815-1171 for a free replacement.
Troubleshooting
Problem Possible solution
The vehicle is not • Verify that the product has power:
responding or Ensure that the prongs on the plug
charging. fit snugly into the 6-20 outlet.
• Verify that the connector of the
charging handle fits securely to
the vehicle's charging port.
• Verify that the vehicle has been
turned off.
• Inspect the product for damage.
If damaged, stop using the product
and switch the circuit breaker off.
Contact customer service.
Error Codes
Problem
Over voltage/
under voltage
Over current
Ground fault
Current leakage
Over
temperature
Relay failure
Failed
self-check
Communication
fault
NOTICE: If power reset can not solve the problem, stop using the
product. Switch the circuit breaker off and contact customer
service for support.
Accessories
WARNING: Since accessories, other than those offered by
DEWALT, have not been tested with this product, use of such
accessories with this product could be hazardous. To reduce
the risk of injury, only DEWALT recommended accessories should
be used with this product.
If you need assistance regarding accessories, please contact the
manufacturer at 1-855-815-1171 or support@dewaltevcharger.com
FCC Statement
FCC Supplier's Declaration of
. Keep
Conformity
Unique identifier:
Responsible party:
U.S. contact
information:
Email:
5
Red and blue light indicator flash exclusively
and sequentially in the order of red then blue,
number of red/blue sequence occurrences
represent different error codes.
RED
ON
ON 2S FLASH once
ON 2S FLASH twice
ON 2S FLASH 3 times
ON 2S FLASH 4 times
ON 2S FLASH 5 times
ON 2S FLASH 6 times
ON 2S FLASH 7 times
DXPAEV016
Paragon Group USA LLC, 100 West
Forest Avenue, Unit A, Englewood,
NJ07631, USA
Paragon Group USA LLC, 100 West
Forest Avenue, Unit A, Englewood,
NJ07631, USA
support@dewaltevcharger.com
BLUE
OFF