Levenhuk Ermenrich Ping SM150 Guia Del Usuario página 4

Ermenrich Ping SM150 Underground Wire Detector
EN
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the device only as
specified in the user manual.
The kit includes: transmitter, receiver, connecting wire (red and black), test probes (red and black), grounding rod, alligator clips (red and
black), USB cable, carry bag, user manual, and warranty.
Charging the device
The transmitter and the receiver use rechargeable lithium batteries. Connect the microUSB cable to the device and the DC adapter via a USB
plug and connect it to the AC power supply to charge the device.
Getting started
Press and hold the power button (3) for 3 seconds to turn the transmitter on/off. Press and hold the power button (15) for 3 seconds to turn
the receiver on/off. The device will beep twice, and the main page will appear on the display. Prior to use, check the device and the cables for
damage.
Join the red connecting wire with the red alligator clip (red test probe); join the black connecting wire with the black alligator clip (black
test probe). Insert the red connecting wire to the positive interface (11) on the transmitter. Insert the black connecting wire to the negative
interface (1) on the transmitter.
Display information
Accessories information
1. Connecting wires
Transmitter
Receiver
2. Alligator clips
Transmission power
1
Live wire icon
2
Set signal code
3
DC voltage symbol
4
5 AC voltage symbol
Voltage value
6
Output signal code
7
Signal intensity
8
Output signal level
9
Acoustic alert
10
Battery indicator
11
Sensitivity level
1
Transmitter battery indicator
2
Live wire icon
3
4 Search signal value
Received signal code
5
Received signal intensity
6
Received signal level
7
Manual mode
8
Automatic mode
9
Non-contact voltage detection function (NCV) indication
10
Acoustic alert
11
12 Battery indicator
3. Measuring probes
4
4. Grounding rod