Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Manual of the photovoltaic control function of the heat pump
Control instructions: when the heat pump needs to use the photovoltaic control
function, first do 2 prerequisites: set the parameter F62= 1, the machine is in the timing
period of the energy-saving mode. At this time, the control mode of the photovoltaic control
function:
1) When the two lines of the machine "PV INPUT" receive the signal of the external
photovoltaic power supply to close (Figure 1 below):
Figure 1
2) The two lines of the heat pump "PV OUTPUT" will send a closed signal to the
photovoltaic power supply (Figure 2 below);
Figure 2
1
Publicidad
