Delta Q Qool Evolution Manual De Instrucciones página 48

A. B.
A. B.
Programming the espresso extraction button.
PERSONALISED SETTINGS
The control panel buttons can also be used to personalise the dosages of the different
drinks.
Programming the espresso extraction button
Note: The pre-defined factory volume for the espresso extraction button is around 30cc.
• To alter the volume of your beverage, ensure the machine is ON, check whether there is
any water in the water tank and wait until the control panel buttons indicate
"Ready to use".
• Then press the espresso extraction button until the indicator lights of the long and the
C.
long drinks extraction buttons start blinking. Press the espresso extraction button.
The indicator lights of the long and the long drinks extraction buttons go out.
C.
Note: If the user does not press again the espresso extraction button after 1 minute, the
equipment will revert automatically to the "Ready to use" mode.
• As soon as extraction has reached the desired dosage, press the espresso extraction
button again and the operation is complete.
The equipment memorises this volume and will start extracting it until new
programming has been defined.
• After completing extraction, the equipment returns to "Ready to use" mode.
Note: If the user fails to press the extraction button to complete the operation,
the equipment will automatically assume the volume around of 75cc.
QOOL
47