dBTechnologies IS 115S Manual De Uso página 18

STACKED INSTALLATION
Stacked installation is possible using the DRK-1 flybar. The IS 115S speaker must be secured using the LP-4 bracket
and the screws supplied with the flybar.
The LP-6 bracket must be used as an interface between the IS 115S subwoofer and the IS 210L speaker.
The maximum limits for all the configurations according to principle safety standards are indicated on the labels
and in the instructions of the accessories.
For any other configuration requiring maximum loading of the system and of the flying points, check the
permitted installations, read the instructions supplied or contact dBTechnologies.
CAUTION!
- Only use brackets and accessories provided by the manufacturer to install the speaker in
flown configurations
- If the speaker is to be used outdoors, we recommend that the system is securely anchored
to prevent movement due to wind or atmospheric agents
3. TROUBLESHOOTING
The speaker does not produce any sound:
1. Check that the audio signal input is connected correctly.
2. Check that the cables used are not damaged.
3. Check that the audio source is powered on and clearly shows an output signal.
IS 115S
18
English
Cod. 420120421 REV. 1.0