Publicidad
Idiomas disponibles
Idiomas disponibles
Dry Ironing
Please follow above steps in the section Steam Ironing but DO NOT press on the
steam button.
Burst of Steam Function
This function provides an extra amount of steam to remove tough wrinkles.
1. Check the water level. Add water if needed.
2. Turn the temperature control dial to the position
3. Wait for the indicator light to stop flashing and the iron is ready for use.
4. Keep pressing the steam button. Steam will penetrate into the garment.
5. Wait for a few seconds before pressing this button again.
Vertical Steam Ironing
Set the iron temperature control to the maximum position.
Hang the garment on a coat hanger and pull it slightly tight with one hand.
Hold the iron in a vertical position and repeatedly press the steam button to iron
the garment, moving the iron from top to bottom.
NOTE: For fabrics other than linen or cotton, hold the iron a few centiments from
the garment to avoid burning the fabric.
Refilling the Water Tank during Use
•
If the water runs out, there is no more steam.
•
Turn off the appliance and then unplug it from the mains socket.
•
Refill the water tank with tap or distilled water, without exceeding the max
level.
•
Plug in the appliance and turn the main switch on to continue ironing.
58
.
Publicidad
