Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE AND CLEANING INSTRUCTIONS
Disconnect the pneumatic sander from the compressed
air line before performing any maintenance and cleaning
task.
Lubrication
The device must be kept constantly lubricated to ensure the
best performance and to ensure the expected service life.
Greasing should be frequent, but not excessive. Just a few drops
of oil for pneumatic tools, after each use are enough. The oil will
lubricate the internal parts.
Lubrication can be carried out automatically by means of an air
filter regulator lubricator fitted in the compressed air system
supplying the appliance or manually if there is no such
component.
If the compressed air system to which the pneumatic sander is
connected does not have an air filter regulator lubricator, carry
out manual lubrication following the procedure given below:
1. Disconnect the appliance from the air hose;
2. Add a few drops of oil, at the air inlet (3), before each use or
every hour if the appliance is used continuously;
3. Add a few drops of oil to the shaft. Turn the shaft to lubricate.
Use only air tool oil. Other types of lubricants will
damage the gaskets.
Silencer cleaning
Clean the silencer (4) regularly according to use.
1. Loosen the fixing screw and remove the silencer cover;
2. Remove the gasket and wash it with warm water;
3. Let the gasket dry completely and assemble the components
in the reverse order of disassembly.
26
Cleaning the inside of the sander
The accumulation of debris and dust inside the appliance,
especially on the shaft, can reduce or block the rotation of the
shaft. Clean the inside of the sander regularly.
1. Unscrew and remove the velcro pad (5);
2. Clean the inside. Use a brush or blow with compressed air to
remove accumulated debris and dust.
Cleaning and storage
Cleaning
Clean the appliance after each use. Careful handling protects
the pneumatic tool and extends its service life.
Storage
When not in use, store the air sander in a dry, clean place, free
of corrosive smoke and out of children's reach.
ENVIRONMENTAL POLICY
The packaging is made up of recyclable materials, which
you can dispose on local recycling points.
Never dispose of air tools with your household waste!
Waste such as lubricants, filters and worn parts can harm
humans, animals and the environment, so they must be
properly disposed of or recycled.
Make sure that the deactivated appliance is disposed of in an
environmentally friendly way at a recycling point.
You can get information regarding the disposal of the appliance
through the person in charge for recycling in your city.
CUSTOMER SERVICE
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Website:
www.centrallobao.pt
Publicidad
